Indoor Irrigation System
Nozzle Jet Irrigation
This system consists of spray lines that run through the length of the riding arena and are attached to hard-PVC pipes on the arena ceiling. The mist spray valves are spaced about 90 cm apart and spread the water evenly. Our nozzle jet system is precisely fitted to your indoor school, taking into account its special aesthetic and technological requirements so that it blends in handsomely into your existing facility. With this, we achieve for you both a considerable dust binding effect and an even watering of the arena surface.
During hot summer months, a pleasant side effect is a refreshing cooling sensation that accompanies the use of our system. Since there is no, or at worst very little, dripping effect after the watering, the arena can immediately afterwards be used again.
Our spray valve systems work according to the module principle. Whether it is automatic frost cleanout, an ideal way of watering the entire track or dividing up the irrigation area into individual segments, all this is possible by choosing the correct system for your particular indoor school! The manufacture of our mist spray valves and our special valves benefits in the production process from a systematic combination of our many years of experience, technological know-how and assembly skills.
Technical Specifications:
- Indoors 20×40m
- Water Connection Requirements: 1¼“
- Minimum Flow Pressure: 3.5 bar
- Water use: approx. 411 liters per minute
- automatic draining
Technical Specifications:
- Indoors 20×60m
- Water Connection Requirements: 1¼“
- Minimum Flow Pressure: 3.5 bar
- Water use: approx. 633 liters per minute
- automatic draining
Rainmaker Systems – Mobile indoor school irrigation
Our mobile rainmaker systems were developed especially for the use in indoor schools. The sprinkling takes place via an intersection system that is being transported along the ceiling with the aid of an electric engine from one gable to the next. Through the separate control of the valves, the areas to be watered can be selected at will. This is especially advantageous in indoor schools where the footing has different drain specifications at different parts. All our systems are made from the highest quality material, while our control system uses resistant, state-of-the-art electronics.
Our SPS (storage programming) control is easy to use, and housed inside a waterproof, lockable box. Power supply is either via power track chain or tube hand loader. There are many options to choose from, providing a solution for every challenge. We are always pleased to drop by and visit with you for an on-site consultation.
Performance Features of the Rainmaker System:
- Waters the entire arena surface (40 meters) in 10 minutes
- High-performance SPS control unit from Siemens
- Speed control for the water volume
- Nozzle control through magnetic valves to water individual areas
- Automatic stop of water supply when the engine is blocked
- Irrigation time ca be regulated via a timer
- CE security certified
Control Device:
Electronic (SPS) control device and division into 5 separate subareas:
- outside track, right and left
- 2nd and 3rd inside track
- middle area
Technical Specifications:
- Indoors Schools 20×40m
- Water Connection Requirements: 1¼“
- Minimum Flow Pressure: 3.5 bar
- Water Flow Volume: 6m³
- Water use: approx. 60-100 litre per minute
- Water use per irrigation: ca. 800 litre
Self-assembly package
Nozzle – Irrigation at the best price attainable
- You are in possession of craftsmanship?
- You have friends or club members, that like to help?
- You want to save money?
- You want to have a technically impeccable but easily understandable system?
- Then ask for our nozzle-irrigation self-assembly package.
We offer a high-quality complete system from the automatic controller to the suspension, so that you will able to start the assembly immediately.
We take over the supply and assembly of all irrigation systems.
